Limits in tracking with extended Kalman filters

The classical linearized conversion of measurements from polar or spherical coordinates to Cartesian ones generates a bias restricting the use of this conversion to cases where the bias can be neglected. In this work, the validity limits for the classical 2D transformation from polar to Cartesian coordinates, as derived in previous work, are shown to be too restrictive and the limits for the 3D transformation from spherical to Cartesian coordinates are introduced. Furthermore, quantitative measures for the performance degradation of the commonly used extended Kalman filter (EKF) in comparison with the best linear unbiased estimation (BLUE) filter are obtained by simulating typical tracking scenarios.     

Structure of the Venusian atmosphere from surface up to 100 km

The goal of this paper is to summarize the experimental data on the atmosphere of Venus obtained after 1985, when the VIRA (Venus International Reference Atmosphere) or COSPAR model was published. Among the most important results that have appeared since then are the following: measurements of the vertical temperature profile by the VEGA spacecraft with high precision and high altitude resolution; measurements made with balloons of the VEGA spacecraft; radio occultation measurements of Magellan, Venera-15, and Venera-16; and temperature profiles derived from the data of infrared spectrometry obtained by Venera-15. The new result as compared to VIRA is the creation of a model of the atmosphere in the altitude range 55 to 100 km dependent on local time. This model is presented in our paper in tabulated form.     

Measuring the matter distribution within z = 0.2 cluster lenses with XMM-Newton

We present an analysis of seven clusters observed by XMM-Newton as part of our survey of 17 most X-ray luminous clusters of galaxies at z  0.2 selected for a comprehensive and unbiased study of the mass distribution in massive clusters. Using the public software FTOOLS and XMMSAS we have set up an automated pipeline to reduce the EPIC MOS and pn spectro-imaging data, optimized for extended sources analysis. We also developped a code to perform intensive spectral and imaging analysis particularly focussing on proper background estimate and removal. XMM-Newton deep spectro-imaging of these clusters allowed us to fit a standard β-model to their gas emission profiles as well as a standard MEKAL emission model to their extracted spectra, and test their inferred characteristics against already calibrated relations.     

Ground penetrating radar VIY-2

VIY-2 ground penetrating radar (GPR) with unique sounding possibilities and use simplicity is presented at this paper. VIY-2 GPR combines all units (synchronizer, transmitting and receiving modules, powering, and antenna system) into single case. The VIY-2 GPR communicates with computer via standard interface RS232 or USB1.0. Technical solutions utilized by the VIY-2 GPR reduce deployment time and simplify surveying process. The VIY-2 GPR design features and its components interaction are considered at this paper. Some field results are also presented here. The VIY-2 GPR design concept allows reducing the data acquisition time,, optimizing the time-varying gain control function, applying depth-stacking dependence, controlling the surveying window position and interference reducing by pulse repetition frequency randomizing.     

Tapped-inductor filter assisted soft-switching PWM DC-DC power converter

A novel high-frequency transformer linked full-bridge type soft-switching phase-shift pulsewidth modulated (PWM) controlled dc-dc power converter is presented, which can be used as a power conditioner for small-scale photovoltaic and fuel cell power generation systems as well as isolated boost dc-dc power converter for automotive ac power supply. In these applications with low-voltage large-current sources, the full-bridge circuit is the most attractive topology due to the possibility of using low-voltage high-performance metal-oxide-semiconductor field-effect transistor (MOSFET) and achieving high efficiency of the dc-dc power converter. A tapped-inductor filter including the freewheeling diode is newly implemented in the output stage of the full-bridge phase-shift PWM dc-dc converter to achieve soft-switching operation for the wide load variation range. Moreover, in the proposed converter circuit, the circulating current is effectively minimized without using additional resonant circuit and auxiliary power switching devices. The practical effectiveness of the proposed soft-switching dc-dc power converter was verified in laboratory level experiment with 1 kW 100 kHz breadboard setup using power MOSFETs. Actual efficiency of 94-97% was obtained for the wide duty cycle and load variation ranges.     

Intrinsic time scale for reconnection on the dayside magnetopause

Recently much attention has been focused on the transient behavior of the magnetopause in response to pressure pulses and southward fluctuations of the interplanetary magnetic field. We examine the motion of the magnetopause behind the foreshock and conclude that this motion is affected by foreshock pressure variations but not by fluctuations in the direction of the magnetic field. Neither magnetopause erosion nor flux transfer event occurrence is controlled by the foreshock. On the contrary, flux transfer events occur at times of steady IMF and thier quasi-periodic behavior is controlled by the magnetopause or the magnetosphere and is not driven by the external boundary conditions. Since flux transfer events are clearly due to reconnection, this observation implies that the IMF must be southward some time perhaps as long as 7 minutes before flux transfer begins.     

Reconfigurable NDI controller using inertial sensor failuredetection & isolation

A modified derivation of nonlinear dynamic inversion provides the theoretical underpinnings for a reconfigurable control law for aircraft that have suffered combinations of actuator failures, missing effector surfaces, and aerodynamic changes. The approach makes use of acceleration feedback to extract information pertaining to any aerodynamic change and thus does not require a complete aerodynamic model of the aircraft. The control law does require feedback of effector positions to accommodate actuator dynamics. Both accelerometer and rate gyro failure detection and isolation (FDI) systems are implemented, allowing up to three independent failures for each FDI system as long as they are in different axes. Nonlinear simulation results show that the FDI systems improve the robustness to accelerometer/rate gyro uncertainties. An advanced tailless aircraft model is used to demonstrate the concepts. The simulation includes accelerometer and rate gyro noise and bias, failures due to accelerometers, rate gyros, and actuators, and modeled missing surfaces that cause airplane aerodynamic changes     

Observer-type Kalman innovation filter for uncertain linear systems

An observer-type of Kalman innovation filtering algorithm to find a practically implementable "best" Kalman filter, and such an algorithm based on the evolutionary programming (EP) optima-search technique, are proposed, for linear discrete-time systems with time-invariant unknown-but-hounded plant and noise uncertainties. The worst-case parameter set from the stochastic uncertain system represented by the interval form with respect to the implemented "best" filter is also found in this work for demonstrating the effectiveness of the proposed filtering scheme. The new EP-based algorithm utilizes the global optima-searching capability of EP to find the optimal Kalman filter and state estimates at every iteration, which include both the best possible worst case Interval and the optimal nominal trajectory of the Kalman filtering estimates of the system state vectors. Simulation results are included to show that the new algorithm yields more accurate estimates and is less conservative as compared with other related robust filtering schemes